Bespoke Hair System, Wigs, Hair Pieces & Toupees in Bristol

Walker Extreme Hold is Walker's strongest silicone-based hair system adhesive, made for maximum hold. Walker rates it at four weeks or more, and it is suitable for all types of unit. Key details Hold: rated by Walker at four weeks or more. Base: silicone. Suits: all types of unit. Sizes: 0.5 oz and 1.4 oz. How to usePrepare clean, dry skin and apply a thin, even layer, then place the system. Because Extreme Hold is built for long wear, skin preparation matters: Walker Scalp Protector applied to clean, dry skin helps the bond. Remove it with a dedicated solvent such as Walker C-22. Extreme Hold or Ultra Hold?Both are rated at four weeks or more. Ultra Hold is an acrylic adhesive that dries clear, while Extreme Hold is silicone-based and Walker's strongest. Our guide to water-based vs long-wear adhesive explains how both compare with GHOSTBOND.Orders placed before 2pm on a working day are dispatched the same day, in discreet, plain packaging, and UK delivery is free on orders over £50.

Walker Lace Release is an alcohol-based adhesive remover designed for delicate lace and mesh systems. It releases tape and adhesive so you can lift the system without pulling, and it is gentle on fragile lace. Key details Type: alcohol-based remover. Suits: lace and mesh systems, and removing tape and lace adhesives. Sizes: 1.4 oz and 4 oz spray. How to useSpray Lace Release around the edges of the system, give it a minute to soften the bond, then lift the base away slowly, adding more as you go. Clean any remaining residue from the base and your skin before you reapply. Our guide on how to remove hair system glue and tape covers each step. Lace Release or C-22?Walker C-22 Solvent is Walker's fastest-working remover and the one to use for long-wear adhesives. Lace Release is the gentler choice for delicate lace. Every remover we stock is in our glue and tape removers collection.Orders placed before 2pm on a working day are dispatched the same day, in discreet, plain packaging, and UK delivery is free on orders over £50.

Walker Scalp Protector is applied to clean, dry skin before your tape or adhesive. It forms a thin film on the skin that helps the bond and reduces irritation, which makes it a useful step for anyone who wears a system for long periods or has sensitive skin. Key details Use: on clean, dry skin before tape or adhesive. Helps: the bond, and reduces irritation. Sizes: 1.4 oz and 2 oz. How to useClean and dry the bonding area, apply a thin layer of Scalp Protector and let it dry completely before you apply tape or adhesive. It works with both hair system tape and hair system glue. Our guide to hair system adhesive and sensitive skin explains how skin preparation helps.Orders placed before 2pm on a working day are dispatched the same day, in discreet, plain packaging, and UK delivery is free on orders over £50.

Ghostbond Classic is the original waterproof hair adhesive trusted by professionals worldwide. Designed for daily wear, it delivers strong, secure hold and dries clear for a natural look. Suitable for oily scalps, high humidity and light perspiration. It provides maximum hold even in tough situations like excessive sweating, extreme moisture, and high temperatures. Designed for Hair Systems Water and oil-resistant Invisible bonding for natural hair looks Advanced adhesion technology Gentle and safe for your skin

Walker Tape®’s Max Hold Sport is our strongest scalp protector, offering our strongest protective barrier for active & humid-weather wearers. It helps protect the scalp from potential irritation, while also serving as an adhesive booster for longer and stronger hold times. It’s the ideal choice for wearers who live active lifestyles or live in extremely hot or humid areas. An adhesive booster for the longest-lasting hold times Allows for exposure to water immediately after install Made for clients with active lifestyles Helps protect adhesive from humidity Creates a protective barrier for sensitive skin Test on a small portion of skin before use Flammable – Do not store or use near heat, sparks, or open flame. Use in a well-ventilated area. Close lid tightly. Do not apply to broken, cut, or irritated skin. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use

Walker Tape®’s C-22 Solvent is our most popular, fastest working skin-safe solvent we make. It is oil-based, safe for all systems, and has a fresh citrus scent. C-22 Solvent is a great fit for stylists that are lookingfor a fast and efficient breakdown speed. Directions Spray C-22 Solvent on the adhesive area. Remover will begin working almost immediately. Saturating the adhesive area and wiping off the residue once breakdown has occurred will help give the best results. The release time will depend on adhesive buildup. Wipe or brush off the residue from the system. Shampoo and rinse C-22 from unit. For Solvent Soaks Fill a large bowl or sink with C-22 Solvent. Place the system into the solvent, base side up. Keep the system submerged and work the adhesive build up off. Wear gloves to keep your hands out of direct contact with the solution. Shampoo the system and rinse. Soak times vary from 5-30 minutes, depending on the type of system and adhesive used. Cautions Flammable - do not store or use near heat, sparks, or open flame. Use in a well-ventilated area. Close lid tightly. Do not apply to cut, broken, or irritated skin. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use. Store in a well-ventilated, cool, dark, dry, room-temperature controlled environment (60-80°F). SDS sheet is available below.

Walker 1522 Clear is a gentle, clear hair system tape designed for one to seven days of wear. It is the Walker tape for new wearers, for sensitive skin and for anyone who takes their system off often, and Walker describes it as hypoallergenic. Key details Hold: designed for one to seven days. Suits: new wearers, sensitive skin, and daily or frequent removal. Sizes: 3/8", 3/4" and 1" wide, in 3, 12 and 36 yard rolls. How to useClean and dry the skin, and remove any old tape and residue from the base with Walker C-22 Solvent. Apply the tape to the base with the liner still on the other side, then peel off the liner, line the system up with your hairline and press it down from front to back. A scalp protector such as Walker Scalp Protector, applied to clean, dry skin, helps the bond. Our Walker Tape guide compares every tape. Which Walker tape?If you want a longer hold for sensitive skin, Walker No-Shine is rated at two to four weeks or more. For the longest hold from tape, choose Walker Ultra Hold. See every option in our hair system tape collection.Orders placed before 2pm on a working day are dispatched the same day, in discreet, plain packaging, and UK delivery is free on orders over £50.

Walker No-Shine is an extended-wear hair system tape for sensitive skin. Walker rates it at two to four weeks or more, and its matte, no-shine finish makes it the least visible Walker tape under a lace base. Walker describes it as hypoallergenic, which makes it a popular choice for wearers who want a long hold but find stronger tapes uncomfortable. Key details Hold: rated by Walker at two to four weeks or more. Finish: matte, for a discreet look under lace and at the hairline. Suits: lace and poly systems, and wearers with sensitive skin. Sizes: 3/8", 3/4" and 1" wide, in 3, 12 and 36 yard rolls. How to useClean and dry the skin, and remove any old tape and residue from the base with Walker C-22 Solvent. Apply the tape to the base with the liner still on the other side, then peel off the liner, line the system up with your hairline and press it down from front to back. A scalp protector such as Walker Scalp Protector, applied to clean, dry skin, helps the bond. Our Walker Tape guide compares every tape. Which Walker tape?For the longest hold from tape, choose Walker Ultra Hold. For shorter wear and frequent removal, 1522 Clear is designed for one to seven days. See every option in our hair system tape collection.Orders placed before 2pm on a working day are dispatched the same day, in discreet, plain packaging, and UK delivery is free on orders over £50.

Walker German Brown is a firm-hold hair system tape for poly systems, and it is also used as a barrier tape under hard-bond adhesives. Walker rates it at one to two weeks of wear. Please note: German Brown contains latex, so it is not suitable if you have a latex allergy. If you need a latex-free option, see Walker No-Shine or 1522 Clear. Key details Hold: rated by Walker at one to two weeks. Suits: poly systems, and as a barrier under hard-bond adhesives. Contains latex. Sizes: 3/8", 3/4" and 1" wide, in 3, 12 and 36 yard rolls. How to useClean and dry the skin, and remove any old tape and residue from the base with Walker C-22 Solvent. Apply the tape to the base with the liner still on the other side, then peel off the liner, line the system up with your hairline and press it down from front to back. A scalp protector such as Walker Scalp Protector, applied to clean, dry skin, helps the bond. Our Walker Tape guide compares every tape.Orders placed before 2pm on a working day are dispatched the same day, in discreet, plain packaging, and UK delivery is free on orders over £50.

Walker Lace Front is a hair system tape made for the front hairline on lace systems. Walker rates it at two to three weeks of wear, and its dull finish and gentler hold keep the hairline looking natural and comfortable to wear. Walker describes it as hypoallergenic. Key details Hold: rated by Walker at two to three weeks. Finish: dull, for a natural look along the hairline. Suits: lace fronts and the front edge of lace systems. Sizes: 3/8", 3/4" and 1" wide, in 3, 12 and 36 yard rolls. How to useClean and dry the skin, and remove any old tape and residue from the base with Walker C-22 Solvent. Apply the tape to the base with the liner still on the other side, then peel off the liner, line the system up with your hairline and press it down from front to back. A scalp protector such as Walker Scalp Protector, applied to clean, dry skin, helps the bond. Our Walker Tape guide compares every tape. Tape or glue at the front?Many wearers use tape at the sides and back and a liquid adhesive along the front hairline. Our guide to hair system glue vs tape explains when each works best, and our hair system glue collection has the full GHOSTBOND and Walker range.Orders placed before 2pm on a working day are dispatched the same day, in discreet, plain packaging, and UK delivery is free on orders over £50.

Jorgen Leave-on Conditioner is designed to eliminate tangles, enhance elasticity, and make hair easier to style. This leave-in formula strengthens the hair shaft to reduce breakage while promoting healthy, manageable hair with every use. Perfect for daily conditioning without rinsing, it’s ideal for men with dry, chemically treated, or hard-to-style hair. Directions: After shampooing, towel dry. Saturate hair with Leave-On Conditioner and brush thoroughly. Do not rinse. Proceed to style. Leave-in formula for tangle-free styling Enhances elasticity to prevent breakage Promotes healthy, manageable hair No-rinse, daily-use formula Made in the U.S.A.

Jorgen Men's Moisturizing Conditioner is designed to penetrate the hair shaft, reduce breakage, and eliminate tangles. With daily use, it adds strength, body, and shine—leaving hair manageable and refreshed without heaviness. Ideal for men with dry, damaged, or chemically treated hair, this conditioner supports healthy hair and scalp maintenance. Strengthens and detangles Adds shine and body Lightweight, daily-use formula Made in the U.S.A.